Infant and Toddler Children's Products-Test Report-CE-EU
SERVICE INTRODUCTION
QiT Quality Inspection & Testing
| Test Report | Report No: XXX |
| Page 1 of 5 |
| Applicant Name | XXX |
| Applicant Address | XXX |
| Receive Date | XXX |
| Report Date | XXX |
| Testing Period | XXX |
The following information is declared by the applicant:
| Sample Description | XXX |
| Color | XXX |
| Fiber Content | XXX |
| Article No. | XXX |
| Order No. | XXX |
| Style No. | XXX |
| Test Result(s) | Please refer to next page(s). |
Authorized Signature
| Test Report | Report No: XXX |
| Page 2 of 5 |
Test Requested and Conclusion(s)
| No. | Test Item(s) | Test Result(s) |
| [A] | ||
| 1 | Azo Colorants | # |
| 2 | Dimensional Stability to Washing | # |
| 3 | Bursting Strength | # |
| 4 | Elastic Stretching | # |
| 5 | Colour Fastness to Water | # |
Remark: #=No Specified Requirement, No Comment
| Test Report | Report No: XXX |
| Page 3 of 5 |
Test result(s):
1 Azo Colorants(ISO 14362-1:2017,ISO 14362-3:2017)
| [A] | Requirement | |
| Azo Colorants(mg/kg) | XXX | XXX |
Remark:
1.ND = Not Detected.
2.Method detection limit: 5mg/kg.
3.mg/kg = milligram(s) per kilogram = ppm = part(s) per million.
4.The individual substances are listed in attached sheet.
2 Dimensional Stability to Washing(ISO 3759:2011, ISO 5077:2007, ISO 6330:2021,Test program No.4N; Machine wash at 40℃ with 2kg load, in 20g ECE reference detergent 98 without optical brightener, normal cycle, after one cycle, tumble dry.)
| [A] | Requirement | |
| After one cycle | ||
| 1/2 Chest(%) | XXX | XXX |
| Cloth length(%) | XXX | XXX |
Remark: (+) Means Extension, (-) Means Shrinkage, Neg.=Negligible.
3 Bursting Strength(ISO 13938-1:2019,Diaphragm bursting method,Test area 7.3cm2)
| [A] | Requirement | |
| Bursting Strength(kPa) | XXX | XXX |
4 Elastic Stretching(ISO 20932-1:2018+Amd 1:2021,Method A, strip test, load 15N,The gauge length 100mm.The extension and retraction rate of the specimen at 500mm/min.)
| [A] | Requirement | |
| Elongation at fixed load at 5 cycles | ||
| Length(%) | XXX | XXX |
| Width(%) | XXX | XXX |
| Permanent deformation after 1min recovery period | ||
| Length(%) | XXX | XXX |
| Width(%) | XXX | XXX |
| Permanent deformation after 30min recovery period | ||
| Length(%) | XXX | XXX |
| Width(%) | XXX | XXX |
| Elastic recovery after 1min recovery period | ||
| Length(%) | XXX | XXX |
| Width(%) | XXX | XXX |
| Elastic recovery after 30min recovery period | ||
| Length(%) | XXX | XXX |
| Width(%) | XXX | XXX |
| Test Report | Report No: XXX |
| Page 4 of 5 |
5 Colour Fastness to Water(ISO 105-E01:2013)
| [A] | Requirement | |
| Colour change(Grade) | XXX | XXX |
| Colour staining(Grade) | XXX | XXX |
| XXX | XXX | |
| XXX | XXX | |
| XXX | XXX | |
| XXX | XXX |
Remark: Grey scale rating is based on the 5-step scale of 1 to 5, Where 1 is bad and 5 is good.
Photograph of Sample
***** END OF TEST REPORT *****
Declaration:
Customer information and sample information shall be provided and confirmed by the client.
The test results are only applicable to the samples received.
The testing report shall not be copied in part.
The copied report is invalid without the "special seal for testing" of our institution.
The testing report is invalid if altered.
You can check the authenticity of the report by scanning the QR code on the report.
Unless required by the client, the test results and compliance judgment of this report do not consider the uncertainty of the measurement results.
If you have any objection to the test results, please apply to our company within 15 days from the date of receiving the test results.
| Test Report | Report No: XXX |
| Page 5 of 5 |
Attached:
| No. | CAS No. | Forbidden Arylamine |
| 1 | 92-67-1 | 4-aminobiphenyl |
| 2 | 92-87-5 | benzidine |
| 3 | 95-69-2 | 4-chloro-o-toluidine |
| 4 | 91-59-8 | 2-naphthylamine |
| 5 | 97-56-3 | o-aminoazotoluene |
| 6 | 99-55-8 | 5-nitro-o-toluidine |
| 7 | 106-47-8 | p-chloroaniline |
| 8 | 615-05-4 | 2,4-diaminoanisole |
| 9 | 101-77-9 | 4,4'-diaminobiphenylmethane |
| 10 | 91-94-1 | 3,3'-dichlorobenzidine |
| 11 | 119-90-4 | 3,3'-dimethoxybenzidine |
| 12 | 119-93-7 | 3,3'-dimethylbenzidine |
| 13 | 838-88-0 | 3,3'-dimethyl-4,4'-diaminobiphenylmethane |
| 14 | 120-71-8 | p-cresidine |
| 15 | 101-14-4 | 4,4'-methylene-bis-(2-chloroaniline) |
| 16 | 101-80-4 | 4,4'-oxydianiline |
| 17 | 139-65-1 | 4,4'-thiodianiline |
| 18 | 95-53-4 | o-toluidine |
| 19 | 95-80-7 | 2,4-toluylendiamine |
| 20 | 137-17-7 | 2,4,5-trimethylaniline |
| 21 | 90-04-0 | o-anisidine |
| 22 | 60-09-3 | 4-aminoazobenzene |
| 23 | 95-68-1 | 2,4-xylidine |
| 24 | 87-62-7 | 2,6-xylidine |
SERVICE INTRODUCTION
Scope of services:
| Product Categories | Product Classification | Testing Regulations | Testing Periodic Time |
 |
Clothing for Kids | ISO 1833 | 2-3 workdays |
| EU NO 1007/2011 AZO PFAS EN 1811 EN 14682 OEKO-TEX 100 SVHC REACH RSL |
5-7 workdays | ||
 |
Sleepwears for Kids | ISO 1833 | 2-3 workdays |
| EU NO 1007/2011 AZO PFAS EN 14878 EN 14682 OEKO-TEX 100 SVHC REACH RSL |
5-7 workdays | ||
 |
Shoes for Kids | EN 1811 RSL SVHC REACH GPSR (EU)2023/988 |
5-7 workdays |
Service Process
1. Consult the customer service → 2. Request the test → 3. Make the payment → 4. Send the sample → 5. Get the report
Notifications
The price of linked products is not the final one.
The final price is determined by different products and test items.
Please contact our customer service staffs to get and confirm the final offer.
Our company provides testing services, the test data is only responsible
for the sample, the test result is qualified or not related to the sample being tested, the test report default PDF format.
Testing is a customized service, and it is not supported to apply for refund or exchange service after placing the order.
There is the possibility of subcontracting the inspections for some test items, please noted with this.
If there is any objection, please inform us in advance, no objection to the default consent.
Thanks for reading above.
Testing Process
1.Contact Customer Service
2.Submit Testing Request
3. Make Payment
4.Send Samples
5.Receive Report
Notifications
The prices of the listed products are for reference only and do not represent the final quotation.
The final price will be determined based on specific products and testing items.
Please contact our customer service team to obtain and confirm the final quotation.
Our company provides testing services. The test data and results are only applicable to the submitted samples. The test conclusions (pass or fail) apply solely to the tested samples. Test reports are provided in PDF format by default.
Testing services are customized. Once an order has been placed, refund or exchange requests are not supported.
Some testing items may be subcontracted to qualified third-party laboratories. Please be aware of this in advance.
If you have any objections, please inform us in advance. Otherwise, it will be deemed that you have accepted these terms.
Thank you for your understanding.
REPORT TEMPLATE
Certifications
Contact us